C613-50105-01 REV C Command Reference for x210 Series 189
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
CPU
Output Figure 6-2: Example output from show cpu
CPU averages:
1 second: 12%, 20 seconds: 2%, 60 seconds: 2%
System load averages:
1 minute: 0.03, 5 minutes: 0.02, 15 minutes: 0.00
Current CPU load:
userspace: 6%, kernel: 4%, interrupts: 1% iowaits: 0%
user processes
==============
pid name thrds cpu% pri state sleep% runtime
1544 hostd 1 2.8 20 run 0 120
1166 exfx 17 1.8 20 sleep 0 3846
1284 aisexec 44 0.9 -2 sleep 0 2606
1 init 1 0.0 20 sleep 0 120
9772 sh 1 0.0 20 sleep 0 0
9773 corerotate 1 0.0 20 sleep 0 0
853 syslog-ng 1 0.0 20 sleep 0 356
859 klogd 1 0.0 20 sleep 0 1
910 inetd 1 0.0 20 sleep 0 3
920 portmap 1 0.0 20 sleep 0 0
931 crond 1 0.0 20 sleep 0 1
1090 openhpid 11 0.0 20 sleep 0 233
1111 hpilogd 1 0.0 20 sleep 0 0
1240 hsl 1 0.0 20 sleep 0 79
1453 authd 1 0.0 20 sleep 0 85
...
Table 2: Parameters in the output of the show cpu command
Parameter Description
CPU averages Average CPU utilization for the periods stated.
System load
averages
The average number of processes waiting for CPU time for the
periods stated.
Current CPU
load
Current CPU utilization specified by load types.
pid Identifier number of the process.
name A shortened name for the process
thrds Number of threads in the process.
cpu% Percentage of CPU utilization that this process is consuming.
pri Process priority state.
state Process state; one of “run”, “sleep”, “zombie”, and “dead”.
To Next Page
Loading...
