Allied Telesis AT-x210-9GT - Show Reboot History

C613-50105-01 REV C Command Reference for x210 Series 206
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
REBOOT HISTORY
show reboot history
Overview Use this command to display the device’s reboot history.
Syntax
show reboot history
Mode User Exec and Privileged Exec
Example To show the reboot history, use the command:
awplus# show reboot history
Output Figure 6-14: Example output from the show reboot history command
Related
Commands
show tech-support
awplus#show reboot history

<date> <time> <type> <description>
-----------------------------------------------
2016-10-10 01:42:04 Expected User Request
2016-10-10 01:35:31 Expected User Request
2016-10-10 01:16:25 Unexpected Rebooting due to critical process (network/nsm) 
failure!
2016-10-10 01:11:04 Unexpected Rebooting due to critical process (network/nsm) 
failure!
2016-10-09 19:56:16 Expected User Request
2016-10-09 19:51:20 Expected User Request
Table 6: Parameters in the output from the show reboot history command
Parameter Description
Unexpected A non-intended reboot.
Expected A planned or user-triggered reboot.
User request User initiated reboot via the CLI.