C613-50105-01 REV C Command Reference for x210 Series 707
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV4 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
(ACCESS-LIST HARDWARE MAC FILTER)
To remove an access-list filter entry that permit packets with a source MAC address
of 0000.00ab.1234 and any destination MAC address, use the commands:
awplus# configure terminal
awplus(config)# access-list hardware my-list
awplus(config-ip-hw-acl)# no permit mac 0000.00ab.1234
0000.0000.0000 any
Related
Commands
access-group
access-list hardware (named)
show running-config
To Next Page
Loading...
