C613-50105-01 REV C Command Reference for x210 Series 764
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
POLICE
SINGLE-RATE ACTION
traffic is dropped; if action is set to remark-transmit, then the red traffic has the
action of the remark map applied to it, and is then transmitted.
Example To configure a single rate meter measuring traffic of 10 Mbps that drops a
sustained burst of traffic over this rate, use the commands:
awplus# configure terminal
awplus(config)# policy-map name
awplus(config-pmap)# class classname
awplus(config-pmap-c)# police single-rate 10000 1875000 1875000
action drop-red
Related
Commands
no police
police twin-rate action
remark-map
To Next Page
Loading...
