Communication Settings
125
NetLinx Studio - Instruction Manual
5. If the selected IP Address is new, the New TCP/IP Setting dialog is presented, indicated the selected IP Address. Fill
in the Description, User Name and Password fields as necessary (FIG. 197).
6. Click OK to save changes, close this dialog and return to the Communication Settings dialog. The new Master’s IP
Address is now indicated in the List of Addresses.
7. With the newly added Master selected, click Select. This updates the Current Platform-Transport Selected window
to indicate that the newly added and selected Master is now the current communication configuration (FIG. 198).
FIG. 196 Listen For Masters dialog - Master Selected
FIG. 197 New TCP/IP Setting dialog
To Next Page
Loading...