1 Safety
• Please install the cables such that
– no one can stumble over the cords,
– the cords cannot be damaged,
– the cords cannot damage the cameras due to mechanical strain,
– the line of sight of the cameras is not obstructed.
Install a strain relief!
• Only use original ART (or ART authorized) components and accessories. Using
non-original components or accessories may damage the equipment, cause mal-
functions or may void operation safety. The provided components and original ac-
cessories can be found in chapters 4 on page 29, 5 on page 54 and 6 on page
71. Only use the originally provided external power supply for operating the camera
ARTTRACK2 and ARTTRACK3 and, if applicable, only the provided PoE+ switch
for ARTTRACK5 & ARTTRACK5/C .
• The equipment must not be dropped and/or knocked.
• Do not use any solvents or water to clean the cameras. For more information about
cleaning the cameras please read chapter 10.2 on page 218.
• Never expose the equipment to high levels of humidity or condensating humidity.
Protect the cameras against water and chemicals.
• The equipment must not be operated in environments with intensive formation of
dust or hot environments where temperatures rise above 40
◦
C (100
◦
F).
Z
ART explicitly denies any liability or warranty if the product is modified
in any way or not used according to this manual and the specification
labels on the equipment.
16
To Next Page
Loading...
