Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Check Valve in Return Hose
– Clamp the intake hose and the return line on the reservoir us‐
ing Hose Clamps - Up To 25mm - 3094- .
– Remove bracket for hydraulic lines -1-.
– Remove pressure line and return line -2- from steering gear.
– Free up the coolant hoses -arrow-.
– Disengage the power steering hydraulic line from the left
brackets on the subframe.
– Remove the driveshaft from front final drive and tie it up, refer
to ⇒ Rep. Gr. 39 .
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
2. Subframe, Stabilizer Bar and Coupling Rod 25
To Next Page
Loading...
