Audi Q7 2007 - Page 34

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove the if equipped -A- (if equipped) from the steering
gear (2 bolts).
Note
♦ Only remove universal joint from steering gear with front
wheels in straight ahead position.
♦ Do not change steering wheel position and steering gear po‐
sition.
– Remove bolt -B- for universal joint at steering gear and remove
universal joint from steering gear.
– Disconnect the connector -arrow- at Servotronic Solenoid
Valve - N119- .
– Remove nut from upper control arm and press arm off.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
26 Rep. Gr.40 - Front Suspension