Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Prepare Scissor Lift Table:
– Set up Scissor Lift Table - VAS6131- with Scissor Lift Table -
Audi Set - VAS6131/10- as well as Scissor Lift Table - A8 Set
- VAS6131/11- and Scissor Lift Table - Q7 Set - VAS6131/13-
as follows:
Table Coor‐
dinate
Parts from Scissor Lift Table - Audi Set -
VAS6131/10- , Scissor Lift Table - A8 Set -
VAS6131/11- and Scissor Lift Table - Q7 Set -
VAS6131/13-
B2 /10-1 /10-2 /10-5 /11-1
G2 /10-1 /10-2 /10-5 /11-1
A4 and C4 /13-5 – – /13-2
F4 and H4 /13-6 – – /13-2
C7 /10-1 /10-2 /10-5 /10-8
F7 /10-1 /10-2 /10-5 /10-8
– Next, fasten support elements by hand onto scissor lift table.
– Position Scissor Lift Table - VAS6131- horizontally.
• Note bubble level (level indicator) on mounting table.
– Guide scissor lift table under engine/transmission assembly.
– Attach mounting elements from Scissor Lift Table - Audi Set -
VAS6131/10- and Scissor Lift Table - A8 Set - VAS6131/11-
at front of subframe as shown in illustration.
– Position supporting elements from Scissor Lift Table - Q7 Set
- VAS6131/13- on strut supports as shown in illustration.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
2. Subframe, Stabilizer Bar and Coupling Rod 27
To Next Page
Loading...
