Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Applies to Engine, Generation I with SCR and Generation II
– Lay several cloths under the power steering pump and hy‐
draulic pipes.
– Clamp the intake hose using Hose Clamps - Up To 25mm -
3094- and remove from power steering pump.
– Remove the screws -1- and remove the pressure line from the
power steering pump.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
332 Rep. Gr.48 - Steering
To Next Page
Loading...
