Configuration
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
156
of 814
3.4
14.8 Absolute range of fluctuation
The absolute range of fluctuation of the (sin²+cos²) measured value in percent.
14.9 Tolerance
14.10 Max error count amplitude
Setpoint for (sin²+cos²) amplitude monitoring of the encoder signals. At activated moni-
toring an error message is generated corresponding to the preset numbers of exceedings
or under-runs of monitoring threshold.
14.11 Error count lower limit
Display of how often the minimum threshold (sin²+cos²) has been under-run.
14.12 Error count upper limit
Display of how often the maximum threshold (sin²+cos²) has been exceeded.
14.13 Max error count sector
Setpoint for the sector monitoring of the encoder signals. At activated monitoring an error
message is generated corresponding to the preset numbers of sector errors.
14.14 Error count sector
Display of how often a sector error has been detected.
14.15 Max error count incremental encoder
Setpoint for the incremental encoder monitoring. At activated monitoring an error mes-
sage is generated corresponding to the preset numbers of incremental encoder errors.
To Next Page
Loading...