Baumuller b maXX BM5800 - Setting Fixed IP Addresses

Commissioning
Parameter manual b maXX BM5800
Document No.: 5.16029.03
21
of 814
2
Figure 2: Setting fixed IP addresses
n Start ProMaster.
n Select b maXX controller PLC with EtherCAT Master from the catalog.
n Select b maXX 5800 Drive Multi Axis Controller EtherCAT Slave from the catalog.
n Open/activate the Workspace window.
n Click the Controller PLC in ProMaster.
n Click EtherCAT Master  Configure Master Bus (ProEtherCAT) in the Workspace win-
dow.
n The window will open: