Baumuller b maXX BM5800 - Description of the Diagnosis Parameter

Diagnosis
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
676
of 814
3.10
3.10.1.2 Description of the diagnosis parameter
6.1 Standstill threshold
The standstill window describes the amount of the speed deviation of n=0. If the speed
actual value is in the standstill window, the drive will set Parameter "N=0 Message" (Pa
-
rameter Z6.2–) to 1.
6.2 Standstill status
The message is updated every 1 ms.
6.38 Motor total voltage
smoothed
FLOAT 0 1000 0 V 1:1 X
6.39 Motor I2t warning
threshold
FLOAT 0 1000 0 % 1:1 X
6.42 Smoothing time electr.
motor power display
FLOAT 0 1000 1.25 ms 1:1 X
6.43 Motor I2t monitoring
mode
UINT 0 0xFFFF 0 1:1 X
6.46 Motor I2t derating fac-
tors
FLOAT 10 100 100 % 1:1 X
175.1 Mode PU temperature
model
UINT 0x0 0xFFFF 0x0 1:1 X
175.2 Status PU temperature
model
UINT 0 0xFFFF 0 1:1 X
175.15 Power unit thermal load FLOAT 0 1000 0 % 1:1 X
Value Meaning
0 The measured actual speed is NOT within the speed window set in the
Parameter "Standstill Threshold".
1 The measured actual speed is within the speed window set in the Param-
eter "Standstill Threshold".