EasyManua.ls Logo

Baumuller b maXX BM5800 - Voltage Test; Danger Areas During Electrical Installation

Baumuller b maXX BM5800
816 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commissioning
Parameter manual b maXX BM5800
Document No.: 5.16029.03
17
of 814
2
2.2 Voltage test
DANGER!
Danger to life from electric current!
When this electrical unit is operated, certain parts of the unit are of necessity at a haz-
ardous voltage.
Therefore:
m Pay attention to the areas on the device that could be dangerous during the elec-
trical installation.
m Pay heed to areas on the device that could still be electrically energized after op-
eration.
Figure 1: Danger areas during electrical installation
DANGER!
Risk of fatal injury from electrical current!
During the routine test of these devices, a voltage test is performed by Baumüller
Nürnberg GmbH in accordance with EN
61800-5-1, Section 5.2.3.2. It is thus unnec-
essary for the customer to do this.
Therefore:
m Subsequent tests of the devices using high voltages may only be performed by
Baumüller Nürnberg GmbH.
m Disconnect the converter from the system during high-voltage testing!

Table of Contents

Related product manuals