Description of the Software Modules and Parameters
Parameter manual b maXX BM5800
Document No.: 5.16029.03
273
of 814
3
3.4.18.1 Parameter overview
Functional block: FbGPState[165]
3.4.18.2 Description of the Parameters
165.1 Mode
Mode for the function - configurable status word.
165.2 Configurable status
This parameter shows the status of the parameterized bits of the source parameters. This
parameter shows the results from the logic operations.
The particular status bit is deleted, if the following occurs:
m The associated channel (source parameter to >0.0<) is switched off
m The associated logic operation (Z165.1– to 0) is switched off
If the function of the logic operations is switched off completely via the Z165.1– Mode
bit 0 = 0, the state of the completely configurable status is frozen at the shut-off time.
Number Name Type Min Max Default Value Unit Factor
Read only
Storage
DS Support
Cyclic Write
Axis-independent
165.1 Mode DWORD 0 0xFFFFFFFF 0 1:1 X O
165.2 Configurable status DWORD 0 0xFFFFFFFF 0x0 1:1 X
165.3 Source numbers UDINT 0 0xFFFFFFFF 0 1:1 X
165.4 Bit mode WORD 0 0xFFFF 0 1:1 X
165.5 Logic functions UINT 0 6 0 1:1 X
165.6 Latch DWORD 0 0xFFFFFFFF 0x0 1:1 O
Bit No. Meaning
0 Control of the entire function “configurable status word”
0: Configurable Status including the links is switched off; the status of all
status bits of the
Z165.2– is frozen.
1: Activation of “configurable status”.
1 Control of the logic operations
0: All operating functions are switched off; the status of the status bits 16
to 30 of the
Z165.2– is frozen.
1: Activation of the parameterized operations
To Next Page
Loading...