Baumuller b maXX BM5800 - Prodrive: Drive Manager for Axis

Commissioning
Parameter manual b maXX BM5800
Document No.: 5.16029.03
45
of 814
2
Figure 28: ProDrive: Ramp function generator
42 Enter values in the following input fields:
m (Ramp function generator) Input
h Enter the value "10". Confirm with Enter.
43 Open the Drive Manager dialog for Axis 1
Figure 29: ProDrive: Drive Manager for Axis 1
44 Select the "Speed control mode“ from the scroll list in the Drive Manager dialog.
45
46 Click on the "Start" button in the Drive Manager dialog.
47 The motor should now rotate at 10 % of the maximum speed.