Baumuller b maXX BM5800 - Homing Methods 15 and 16 (Reserved); Homing Methods 17 to 30 (Without Zero Pulse or Zero Angle)

Description of the Software Modules and Parameters
Parameter manual b maXX BM5800
Document No.: 5.16029.03
571
of 814
3
Figure 157: Homing method 11 to 14
3.8.3.13 Homing Methods 15 and 16 (reserved)
These methods are reserved for future extensions according to the CANopen drive pro-
file.
3.8.3.14 Homing Methods 17 to 30 (without zero pulse or zero angle)
The homing methods 17 to 30 do not use zero pulse or zero angle as an additional refer-
ence mark. Only the switch is referenced. Otherwise, these methods correspond with
homing methods 1 to 14.
Only homing methods 19 and 20 are shown as an example.