Baumuller b maXX BM5800 - Prodrive Power Unit; Parameter Overview

Configuration
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
62
of 814
3.4
3.4.1.1 ProDrive Power Unit
Axis unit:
Figure 32: ProDrive Power Unit - axis units
3.4.1.2 Parameter overview
Functional blocks: FbPsChars [129]
FbPower_Section [130]
FbPuTempModell [175]
For Parameter 6.27 see ZDiagnosis– from page 676
For Parameters 19.6 and 107.9 see ZMotor– from page 81
NOTE!
If the temperature model regarding the overload monitoring of the power unit is active
(see
Z175.2– Bit 0), the output frequency-dependent limit (ZFig. 31–) of the maxi-
mum drive current is dropped.