Baumuller b maXX BM5800 - Requirements for the Electrical Supply; Preparations

Requirements for the electrical supply
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
18
of 814
2.3
2.3 Requirements for the electrical supply
For all important data, see the Operating Manual for the b maXX 5800.
Small deviations in the electrical supply from the requirements can result in malfunctions
of the device. If the supply deviates greatly from the requirements, the device could be
destroyed.
The device may only be operated in environments of the second type (industrial environ-
ment).
The destruction of the device can cause personal injury.
2.4 Preparations
Specimen installation of a BM5032 mains rectifier unit and Axis 1 of a dual-axis BM5323
with a Baumüller Motor DS 56-S motor (SRS50 encoder, sine-cosine with HIPER
-
FACE

).
The prerequisite for the commissioning is that assembly and installation have been car-
ried out correctly.
1 Make sure that the assembly is carried out correctly and, in particular, that all safety
regulations have been observed (see Assembly in the Operating Manual for the
b
maXX

5800 basic unit).
DANGER!
Danger to life from electric current!
If the requirements for the electrical supply are not complied with, the device may be
damaged/destroyed and consequently present a significant danger to persons.
Therefore:
m Before installation, make sure that the requirements for the electrical supply are
met.
NOTE
Pictures for the next work steps can be found in the Operating Manual for the
b
maXX

5800 basic unit.