Baumuller b maXX BM5800 - Prodrive: Device Selection with Ethercat Communication

Preparations
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
24
of 814
2.4
n Select the device: Button SELECT DEVICE
n Select the device type for which parameters are to be set: Button TYPE
(here: b maXX5800 Drive Multi Axis Controller)
n Select the communication: Button TYPE (here: TCP/IP)
Figure 6: ProDrive: Device selection with EtherCAT communication
9 Start the graphical user interface by clicking on "OK".