Baumuller b maXX BM5800 - Prodrive: Motor-Synchronous; Prodrive: Parameter List - Motor Type

Performing the commissioning (using Axis 1 as an example)
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
36
of 814
2.6
Figure 19: ProDrive: Motor-Synchronous
Using the parame-
ter list
If you are not using the Baumüller motor database, you can also enter all the motor pa-
rameters using the "Parameter list".
20 Click on the "Parameter list" in the project tree.
21 In the parameter list, click on "Motor Id".
Figure 20: ProDrive: Parameter List - Motor Type
The following motor parameters must be specified:
m Maximum speed, mech. (Z107.26– Maximum speed, mechanical)