Management
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
346
of 814
3.5
100.11 Launch application error
The application errors 1 to 5 are set by writing this parameter.
100.12 Error count RAM log
This parameter is only relevant in connection with the PLC function blocks BM_GetError-
Info (at VARAN) and BM_GetDriveError (at EtherCAT) and is evaluated by these function
blocks (see the Online-help of these function blocks).
Function Drive 1 Control Drive 2
Transmission exter-
nal
Z100.7– = 1 Z100.9– (Drive 2) =
Z100.8– (Drive 1)
Z100.9– (Drive 1) =
Z100.8– (Drive 2)
Z100.7– = 1
Transmission inter-
nal (within a double
axis)
Z100.7– = 3 - Z100.7– = 3
Value Error, which is set
0 Noneffective
1 175 - Application error 1
2 176 - Application error 2
3 177 - Application error 3
4 178 - Application error 4
5 179 - Application error 5
To Next Page
Loading...