Baumuller b maXX BM5800 - Page 372

Set Value Generators
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
372
of 814
3.6
110.21 SS1 stop time
The SS1 stop ramp brakes the drive speed-controlled to 0.
The set time in this parameter applies to a 100% change of the set value (braking decel-
eration independent of the instantaneous speed) or applies to the instantaneous speed
(braking time to 0 independent of the instantaneous speed). The behavior is set in param
-
eter Z110.2– bit 13.
The SS1 stop ramp is available only for error reactions.
110.22 Active cycle time ramp generator
Displaying the cycle time of the set value processing of the ramp function generator.