Set Value Generators
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
376
of 814
3.6
132.12 Set value 2
Set value in Time zone 2 of the set value generator.
When the set value generator is started, a check is made to make sure that the set value
lies within the range of values in the target parameter and if necessary an error message
is issued.
132.13 Duration zone 2
Duration of Time zone 2 for the set value generator in ms. The associated set value is
applied to the output of the generator for this duration.
132.14 Set value 3
Set value in Time zone 3 of the set value generator.
When the set value generator is started, a check is made to make sure that the set value
lies within the range of values in the target parameter and if necessary an error message
is issued.
132.15 Duration zone 3
Duration of Time zone 3 for the set value generator in ms. The associated set value is
applied to the output of the generator for this duration.
132.16 Set value 4
Set value in Time zone 4 of the set value generator.
When the set value generator is started, a check is made to make sure that the set value
lies within the range of values in the target parameter and if necessary an error message
is issued.
132.17 Duration zone 4
Duration of Time zone 4 for the set value generator in ms. The associated set value is
applied to the output of the generator for this duration.
To Next Page
Loading...
