Baumuller b maXX BM5800 - Page 38

Performing the commissioning (using Axis 1 as an example)
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
38
of 814
2.6
Figure 22: ProDrive: Data Set Manager
24 Wait until "Successful" is displayed under "Data Set Status"
25 At this point the data set is saved in Flash memory.
26 Disconnect the device from the main power and control voltage supplies.
27 Reconnect the power supplies to the b maXX


(main power supply + control voltage).
By switching off and on again, you can check whether the settings you have made will
result in warnings or errors.
No errors may be present.