Baumuller b maXX BM5800 - Page 40

Performing the commissioning (using Axis 1 as an example)
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
40
of 814
2.6
Figure 24: ProDrive: Autotuning of the Current Controller
Searching for the
notch position
It is now necessary to search for the notch position.
29 Go to the project tree and click on "Operating Modes", then click on "Find Notch Po-
sition".