Description of the Software Modules and Parameters
Parameter manual b maXX BM5800
Document No.: 5.16029.03
65
of 814
3
129.4 Hardware name
This parameter begins with the abbreviation of the axis module type separated by colon
and followed by the type code of the device.
129.5 Current scaling gain
Standardization factor for current measurement, depends on the power unit.
129.6 DC scaling gain
Standardization factor for the DC link voltage, depends on the power unit.
129.7 Main voltage scaling gain
Standardization factor for the supply voltages, depends on the power unit
(relevant to mains rectifier units)
129.8 Current converter configuration
Factory settings for the configuration
Abbreviation Meaning
YY Year Example: 2008
NN Sequential number Example: 15
BB Assembly variant Example: 02
A Revision number Example: D
01 Technical status Example: 04
Abbreviation Meaning
EA: Single axis unit
DA: Double axis unit
To Next Page
Loading...