Configuration
Parameter manual b maXX BM5800
Document No.: 5.16029.03 Baumüller Nürnberg GmbH
68
of 814
3.4
129.24 Time phase error
Maximum time for which the drive can be operated at nominal current with a phase failure.
See also
Z130.24–.
129.25 Current phase error
If Bit 2 of the Supply Mode parameter (Z130.10–) is not set:
Maximum current at which the drive can be operated with a phase failure.
129.26 Max. heat sink temperature
Switch-off threshold for heat sink temperature
129.27 Max ambiance temperature
Switch-off threshold for the internal temperature of the power unit
129.41 Max. ground current
Monitoring the maximum ground current
129.42 Min. DC link voltage
Monitoring the minimum DC Link voltage
129.44 Firmware version
Reserved
129.45 Power factor
Reserved
To Next Page
Loading...