78 | Chapter 2: Installation
3. Highly Recommended: select the Plate Type, fill in the text fields, and add any
steps that you want all new protocols to include.
4.
Click Save and assign a unique name, e.g. Template.LHC.
5. Select Tools>Preferences>New Protocol.
6. Select the button for Protocol selected below to use as a template.
7. Click selected and select the protocol you created as a template.
Define startup behavior:
8. After completing the steps above, select the Startup Options tab.
9. Select the button for New Protocol.
10. Click OK to save your new preferences.
MultiFlo™ FX Multi-Mode Dispenser
To Next Page
Loading...
