12 | Chapter 1: Introduction
Package Contents
n Part numbers and package contents are subject to change and vary according
to instrument model. Please contact BioTek Customer Care if you have any
questions.
Description PN
Power cord (part numbers vary by country of use) Varies
Power supply 76077
RS-232 serial cable 75034
USB cable (USB Virtual COM Port Driver Software & instructions) 75108
Microplate carrier 7170501
Priming trough insert (1 or 2) for Peri-pump 7182043
Priming trough insert for Syringe dispensers (2) and Strip washer
or RAD dispenser
7182044
Strip plate (12x1) 98265
Screwdriver, Phillips 98268
Accessory kit 1260004
Stylus: for cleaning washer and Syringe manifold dispense tubes 2872304
10 cc syringe and tubing for Peri-pump cassette maintenance 7210021
Shipping brackets (2) - model dependent 1262010
1262011
1262115
Hex wrench: 7/64" for removing shipping brackets 48169
Peri-pump Reservoir Holder (2 holders + 4 straps) 7212034
7212035
MultiFlo™ FX Getting Started Guide (and operator’s manual on USB
- PN 1261000)
1261006
n Some components are model specific, they ship only with certain instrument
models.
MultiFlo™ FX Multi-Mode Dispenser
To Next Page
Loading...
