Biotek MultiFlo FX - Set up the Peri-Pump Dispenser; Attach the Peri-Pump Cover Panel

44 | Chapter 2: Installation
Set Up the Peri-pump Dispenser
Install these items to use the Peri-pump dispenser:
l Install the external Peri-pump, if applicable
l Install RAD Technology Components
l Or, attach the Peri-pump cover panel
l Dispense cassette
l Fluid supply vessel
l (Optional) Prime trough insert
Attach the Peri-pump Cover Panel
Optionally, if you are not installing an external (or secondary) Peri-pump, install
the cover panel provided to conceal the primary Peri-pump.
Install the cover panel using the two hex screws and the Allen wrench shipped with
the MultiFlo FX.
MultiFlo™ FX Multi-Mode Dispenser