Biotek MultiFlo FX - Install RAD Technology Cassette

58 | Chapter 2: Installation
Install RAD Technology Cassette
RAD technology's single-tube and 8-to-1 bulk dispensing cassettes are installed like
standard cassettes with one difference, the tip holder is installed on the dedicated
RAD dispense head. Install the RADcassettes on the external or secondary Peri-
pump only! They are not designed for use on an internal Peri-pump.
Follow instructions to Install the Dispense Cassette on page 56 skipping the first step.
Magnets on the dispense head hold the cassette tip(s) in place:
Single tube RADcassette 8-tube-to-1 Bulk RADcassette
Align the two pins with the holes (above and below the magnets) on the dispense
head.
n You must create a protocol to successfully use the RAD8-to-1 bulk-dispensing
cassette. It is not compatible with Quick Dispense.
MultiFlo™ FX Multi-Mode Dispenser