Chapter 2
Installation
This chapter provides detailed installation instructions.
Unpack and Inspect the Instrument 28
Install the Waste Tubing 29
Remove the Shipping Hardware 31
Set up the Strip Washer 34
Set Up the Peri-pump Dispenser 44
Install the Secondary Peri-Pump 46
Install RAD Technology Components 51
Install the Syringe Dispenser Component 62
Install Software/Connect to Computer 71
Connect Power Cable 72
Define Instrument Settings 73
Verify Performance 79
Repacking the MultiFlo FX 82
Install the Shipping Hardware 83
Repacking the Secondary Peri-pump 85
MultiFlo FX Repacking 86
Repacking the Syringe Dispenser 89
Repacking the Strip Washer 90
To Next Page
Loading...
