86 | Chapter 2: Installation
Put it all together
1. Pack other accessories and the power
cord in the box.
2. Repack the cardboard and foam
shipping materials to secure the items
in place.
3. Tape the box closed. This box will fit
into the box with the instrument.
MultiFlo FX Repacking
1. Reverse the
steps
described to
Remove the
Shipping
Hardware.
First remove
the two
shipping
brackets from
the back of the
instrument,
then install
them.
2. Put a rubber
band around
the Peri-
pump.
MultiFlo™ FX Multi-Mode Dispenser
To Next Page
Loading...
