Biotek MultiFlo FX - Features of the Multiflo FX; Washer

Features of the MultiFlo FX | 3
Device/Component Description
3 Aspirate/RAD arm Washer and RAD models only: holds the strip washer's
aspirate manifold or the RAD cassette's tip holder.
4 Priming trough Waste reservoir for collecting or disposing of priming fluid.
Priming trough inserts, for collecting fluid, are shown in this
image.
5 Plate Carrier Holds standard microplates for processing.
6 Touch screen One of two ways to control the MultiFlo FX; the other way is
LHC.
7 Strip Washer An external module containing a syringe-pump dispenser
and vacuum aspiration pump.
8 Syringe Dispenser Another external module with two distinct syringe-pump
dispensers that support a variety of manifold types to
process standard and low-density microplates.
9 Peri-pump Dispenser Secondary or external Peri-pump dispenser (required for
RAD models).
See Plate Types Table on page 9 to review the plate types supported by each
device.
Features of the MultiFlo FX
l Supports all microplate-based assays, including ELISA, fluorescence,
chemiluminescence, RIA, DNA probes, and cellular assays.
l A variety of solutions, including buffered saline and reagents can be dispensed.
l The intuitive onboard software allows you to create and store wash and dispense
protocols. BioTek provides numerous predefined protocols for maintenance and
instrument qualification purposes.
l Two USB flash drive ports facilitate file transfer and storage.
l A low-maintenance design, the result of BioTek’s long history with liquid-handling
instruments.
l Compatible with BioTek’s BioStack™ Microplate Stacker for automated plate processing.
l A robot-accessible carrier that can be interfaced into some robotic systems.
l Computer control using BioTek’s Liquid Handling Control™software (“LHC”).
Washer
BioTek Instruments, Inc.