Install RAD Technology Components | 59
Prime Trough Inserts
The MultiFlo FX ships with special reservoirs that fit into the dispensers’ priming
trough to capture expensive reagent after priming, rather than discarding it.
Three types of Prime Trough Inserts may be provided:
l PN 7182043 for the Peri-pump dispenser, holds approximately 12 mL (1 per
dispenser)
l PN 7182044: 2 for the Syringe dispensers, 1 for the washer, holds
approximately 6.5 mL
n Without the prime trough insert, the priming trough empties into the regular
waste bottle.
Important: Remove the priming trough inserts when using the 8-to-1 RAD cassette.
The chute will collide with both the RAD priming cup and the Syringe dispenser insert if they
are left in the priming trough.
BioTek Instruments, Inc.
To Next Page
Loading...
