xii | MultiFlo FX Operator's Manual
Warranty and Product Registration
Please take a moment to review the Warranty information that shipped with your
product. Please also register your product with BioTek to ensure that you receive
important information and updates about the product(s) you have purchased.
You can register online through BioTek’s Customer Resource Center (CRC) at
www.biotek.com or by calling 888/451-5171 or 802/655-4740.
Dispense Cassette Warranty
The Peri-pump dispense cassettes are backed by BioTek's Confidence-Plus lifetime
warranty. For the lifetime of the cassette, BioTek guarantees the cassette
components (Tip Holder, Center Holder, Tube Tensioner, and Tube Organizer) will
withstand steam autoclave conditions of 121°C and 1 bar (750 mmHg) without
adversely affecting dispense performance. In the event of a failure of any cassette
component previously listed, BioTek will replace the cassette components free of
charge.
Repackaging and Shipping
If you need to ship the instrument to BioTek for service or repair, contact BioTek
for a Return Materials Authorization (RMA) number and use the original packing
materials. Other forms of commercially available packaging are not recommended
and can void the warranty. If the original packing materials have been damaged or
lost, contact BioTek for replacement packing.
Warnings
Operate the instrument on a level, stable surface away from excessive
humidity.
When operated in a safe environment, according to the instructions in this
document, there are no known hazards associated with the MultiFlo FX.
However, the operator should be aware of certain situations that could result in
serious injury; these vary depending on the instrument type. See Hazards and
Precautions.
Strict adherence to instrument maintenance and qualification procedures is
required to ensure accurate dispense volumes and risk-free operation.
MultiFlo™ FX Multi-Mode Dispenser
To Next Page
Loading...
