Biotek MultiFlo FX - Quick Wash; Add Protocols to the Home Screen; Remove Protocols from the Home Screen

Touch Screen Basics | 95
fluid supply vessel. See Handling Special Plates and Mini-tubes on
page 134.
Quick Wash
Home>Quick>Basic Wash
Quick Wash uses default values for all parameters except those available for
modification: volume, plate type, number of cycles. Quick Wash is useful when
you do not need to retain protocol parameters for future use or reference. The
Magnet Adapter Height and Plate Clearance instrument settings apply to the Quick
Wash to accommodate non-standard plates.
Define a Quick Wash
1. Touch the field you want to change for a pick list of options or a number pad.
2. Make your selections, put a plate on the carrier, and press Start to wash the
plate.
Learn more:
l Create a protocol to save a record of the wash parameters, to confidently repeat the
wash procedure and/or to modify wash parameters to improve performance.
l See Wash Parameters Table on page 108 to review options available in a wash protocol.
l See About the Wash Step.
Add protocols to the Home screen
The MultiFlo FX puts all saved protocols on the Home screen for easy retrieval.
Create and save a protocol to add it to the Home screen listing.
Create or Modify a Protocol on page 102.
Remove protocols from the Home screen
All saved protocols appear on the Home screen. To remove a protocol from the
Home screen listing:
1. Select Protocols at the Home screen.
2. Highlight the protocol you want to remove and press Delete.
The protocol file will be permanently deleted.
BioTek Instruments, Inc.