172 | Chapter 3: Operation
To transfer Lid Definition files:
1. Insert the memory stick into the USB port on top of the washer.
2. Choose the File Source: Internal to copy files to the flash drive, or USB to copy
files from it to the MultiFlo FX.
3. Optionally, apply the Lock files option to prevent users from changing the
protocols.
4. Select files individually by highlighting them (touch) or transfer all files
simultaneously.
Files transferred to the MultiFlo FX can be attached to a protocol and, if not locked,
modified from the Plate Lid Definition screen.
MultiFlo™ FX Multi-Mode Dispenser
To Next Page
Loading...
