EasyManua.ls Logo

BRP Evinrude E-TEC G2 - Page 114

BRP Evinrude E-TEC G2
460 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electrical and Ignition
Electrical Harness Connections
114
EMM J3 Connector EMM J4 Connector
Pin
No.
Description of Circuit Wire Color
1 CAN low (NMEA 2000) Dark Blue
2 CAN high (NMEA 2000) White
3 CAN low (remote control network) Dark Blue
4 CAN high (remote control network) White
5 Exhaust temperature sensor Pink/Yellow
6empty
7 CAN supply + (NMEA 2000) Red
8 CAN ground (NMEA 2000) Black
9 Water Valve (250 H.O., 300 HP only) Blue/Yellow
10 Oil pump, cylinder Blue/Orange
11 Injector, cylinder 6 Dark Green
12 Injector, cylinder 4 Purple
13 Injector, cylinder 2 Dark Blue
14 Knock sensor +, starboard Gray/Red
15 Knock sensor +, port Gray/Orange
16 Knock sensor, digital ground Gray/Black
17 empty
18 Ignition, cylinder 6 Orange/Green
19 Ignition, cylinder 4 Orange/Purple
20 Ignition, cylinder 2 Orange/Blue
21 empty
22 empty
23 empty
24 empty
25 CAN high, power steering Brown/Orange
26 CAN low, power steering Orange/Black
3011784
Pin
No.
Description of Circuit Wire Color
1empty
2empty
3empty
4 Fuel vapor vent solenoid Brown/Yellow
5empty
6 +12V Purple/White
7 Shift actuator, ground Yellow/Green
8 Shift actuator + Yellow/Blue
9empty
10 empty
11 empty
12 Fuel lift pump Brown/White
13 Fuel circulation pump Brown
14 Remote oil pump Dark Blue/Red
15 Electronic throttle body, motor+ Gray/Blue
16 Electronic throttle body, motor ground Gray/White
3011161

Table of Contents

Other manuals for BRP Evinrude E-TEC G2

Related product manuals