Canon imageCLASS D530 - Page 337

4
4
4-261
4-261
Disassembly/Assembly > Controller System > Removing the Paper Leading Edge Sensor PCB (L418S/L410/L190) > Procedure
Disassembly/Assembly > Controller System > Removing the Paper Leading Edge Sensor PCB (L418S/L410/L190) > Procedure
3)Remove the harness spring[1] from the hook[2], and free the harness[3] from the guide[A].
[1]
[2]
[3]
[A]
4)Remove the harness retaining spring[1] and 4 connectors[2].
x4
[1][2]
F-4-697
F-4-698
5)Remove the harness[1] from the guide[A] and [B].
[1] [A]
[1]
[B]
6)Remove the paper leading edge sensor PCB[1]
• 2 claws[2]
x2
[1]
[2]
[2]
F-4-699
F-4-700