Canon imageCLASS D530 - Removing the SADF Pickup Unit (Mf4870 Dn;Mf4830 D)

4
4
4-65
4-65
Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Pickup Unit (MF4870dn/MF4830d) > Procedure
Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Pickup Unit (MF4870dn/MF4830d) > Procedure
4)Remove the SADF unit[1] by lifting it up while pushing the claw[2]
Caution:
Be sure to avoid damaging the bottom sheet when placing the removed SADF unit.
[1]
[2]
Caution:
When installing the DADF unit , be careful not to damage the harnesses with [A]
part.
F-4-157
F-4-156
Removing the SADF Pickup Unit (MF4870dn/MF4830d)
■
Preparation
1) Remove the left cover.
2)Remove the SADF unit and reader unit
3)Remove the SADF unit.
■
Procedure
1) Open the SADF pickup tray[1] and remove the SADF pickup tray.
• 2 shafts[2]
[1]
[2]
[2]
2)Open the SADF upper cover[1] and remove the SADF rear cover.
[1]
[2]
x3
[3]
[2]
[3]
[3]
F-4-158
F-4-159