Canon imageCLASS D530 - Removing the Laser Scanner Unit (D530)

4
4
4-272
4-272
Disassembly/Assembly > Laser Exposure System > Removing the Laser Scanner Unit (D530) > Procedure
Disassembly/Assembly > Laser Exposure System > Removing the Laser Scanner Unit (D530) > Procedure
2) Move the laser scanner unit [1].
• 4 screws [2]
• 1 sponge[3]
[1]
x4
[2] [2]
[3]
3) Remove the laser scanner unit [1].
• 1 at cable [2]
• 1 connector [3]
x2
[1]
[2]
[3]
F-4-731
F-4-732
Removing the Laser Scanner Unit (D530)
■
Preparation
1)Remove the left cover.
2)Remove the copyboard cover and reader unit.
3)Remove the right cover.
4)Remove the front cover unit.
5)Remove the upper cover
■
Procedure
Caution:
Do not disassemble the laser scanner unit because adjustment is required.
1)Remove the 2 connectors[1] and 2 at cables[2], and put them through the hole[A] of the
left side plate to the inside.
x4
[2]
[A]
[A]
[1]
Caution:
When removing the scanner cover, be sure to disconnect the at cable in advance
to prevent damage to the cable
F-4-733