Canon imageCLASS LBP6780dn - Page 178

3
3
3-56
3-56
Disassembly/Assembly > Controller System > Removing the Cassette Pickup Solenoid > Procedure
Disassembly/Assembly > Controller System > Removing the Cassette Pickup Solenoid > Procedure
CAUTION:
• When installing the Gear Cover, be sure to align the shaft with the 5 Shaft Holes [2]
of the Gear Cover [1].
• When installing the Gear Cover, be sure to route the harness [3] of the Multi-purpose
Tray Pickup Solenoid around the guide section of the Gear Cover [1] one and a half
times in a clockwise direction.
[1]
[3]
[2]
F-3-117
2) Remove the Cassette Pickup Solenoid [1].
• 1 Screw [2]
[1]
[2]
F-3-118
CAUTION:
When installing the Cassette Pickup Solenoid to the main body, install the Fixation Plate
[2] of the Cassette Pickup Solenoid under the plate [1] of the Right Side Plate.
[1]
[2]
[1]
[2]
F-3-119