Canon imageCLASS LBP6780dn - Paper Source Menu; Std Network Menu

1
1
1-18
1-18
Product Description > Using The Machine > Setup Menu (LBP3580/6780x) > Std Network Menu
Product Description > Using The Machine > Setup Menu (LBP3580/6780x) > Std Network Menu
Setting Item Setting Value
Secure Job Log Off* , On
Select PDL (PnP) UFR II
* ,
UFR II XPS , PCL5e , PCL6 , PS3 , XPS (Direct)
Mng. Settings Settings Key Lock : Off* , On
Adjust Screen Contrast
: (
-3 Dark - 0* - +3 Light
)
Backlight Brightness : Off , Level 1 , Level 2 , Level 3*
Animated Instruction Off , On*
Show Toner Gauge Off , On*
Set. Comp. Notify Off , 1 second , 2 seconds , 3 seconds*
Scrolling Speed Slow , Normal* , Fast
• "*" indicates factory default setting.
■
Paper Source Menu
Setting Item Setting Value
Paper Feeder Paper Source : Auto* , Drawer 1 , Drawer 2 , Drawer 3
MP Tray Paper Size A6 , A5 , A5R , B5 , A4 , LTR* , LGL , EXEC , Mixed Size ,
Custom Size , Custom Size R , Env. ISO-C5 , Env. Monarch ,
Env. No. 10 , Env. DL , Index Card , STMT , FLSC , 16K
NP Tray Priority Off* , On
Drawer 1 Priority A6 , A5 , A5R , B5 , A4 , LTR* , LGL , EXEC , Mixed Sizes , Custom
Size , Custom Size R , Env. ISO-C5 , Env. Monarch ,
Env. No. 10 , Env. DL , Index Card , STMT , FLSC , 16K
Drawer 2 Priority A6 , A5 , A5R , B5 , A4 , LTR* , LGL , EXEC , Mixed Sizes , Custom
Size , Custom Size R , Env. ISO-C5 , Env. Monarch ,
Env. No. 10 , Env. DL , Index Card , STMT , FLSC , 16K
Drawer 3 Priority A6 , A5 , A5R , B5 , A4 , LTR* , LGL , EXEC , Mixed Sizes , Custom
Size , Custom Size R , Env. ISO-C5 , Env. Monarch ,
Env. No. 10 , Env. DL , Index Card , STMT , FLSC , 16K
Standard Paper Size A6 , A5 , B5 , A4 , LTR* , LGL , EXEC , Env. No. 10 , Env. No. 10 , Env.
DL , Index Card . STMT , FLSC , 16K
Dif. Paper Tray Off* , On
Auto Selection Multi-Purpose Tray : Off , ON*
Drawer 1 : Off , On*
Drawer 2 : Off , On*
Drawer 3 : Off , On*
Default Paper Type Plain* , Plain L , Heavy 1 , Heavy 2 , Transparency , Envelope , Labele
, Labels
2-Sided Printing On , Off*
• "*" indicates factory default setting.
T-1-32
T-1-33
■
Std Network Menu
Setting Item Setting Value
IPv4 Setting IPv4 : Off , On*
IP Mode : Auto* : Manual
Protocol : -
Use DHCP : Off , On*
Use BOOTP : Off* , On
Use RARP : Off* , On
IP Address Setting
IP Address : -
Subnet Mask : -
Gateway Address : -
DNS : -
DHCP Option : -
Acquire Host name : Off , On
DNS Dynamic Update : Off : On*
IPv6 Setting IPv6 : On , Off*
WINS Resolution On* , Onn
FTP FTP : On , Off*
FTP Settings : On , Off*
LPD Print On* , Off
RAW Print On* , Off
BMLinkS On , Off*
IPP Print On , Off*
WSD WSD Print : On , Off*
WSD Browsing : On , Off*
HTTP On* , Off
Message
Proxy Setting Proxy : On , Off*
Server Address
Port Number : 0 to 80* to 65535
Same Domain : Use Proxy , Do Not Use Proxy*
Proxy Authentication : On , Off*
User Name
Password
SNTP On , Off*
Discovery Response On* , Off
IPSec On , Off*
NetWare Settings On , Off*
Frame Type : Auto Detect* , Ethenet II , Ethenet 8022 , Ethenet 8023
, Ethenet SNAP
Print Service : Bindery PServer , RPrinter , NDS PServer* , NPrinter
Apple Talk On , Off*
SMB SMB Server : On , Off*
SMB Print : On , Off*