Canon imageCLASS LBP6780dn - Key Operations

1
1
1-11
1-11
Product Description > Using The Machine > Control Panel (LBP3580/6780x) > Key Operations
Product Description > Using The Machine > Control Panel (LBP3580/6780x) > Key Operations
■
Key Operations
No. Name Function
[2]
(Job Status/Cancel)
Cancels the job when the Job indicator is
on or blinking. Does not function when the
Job indicator is off.
The printer is ready to print..
Does not function.
[3]
(Utility)
Displays the [Utility] menu.
Prints information about the
printer settings including the
current settings.
Does not
function.
Goes back up the previous
hierarchy.
[4]
(Back)
Does not function. Goes back up the previous
hierarchy.
[5]
(Online)
Switches between online and ofine. The printer is online when the
indicator under the key is on and is ofine when the indicator is off.
[9]
(Power)
If [Power Save Mode] is set to a setting other than [Off], the printer
enters Power Save Mode.
[10]
(Job)
Displays the [Job] menu. You
can print various log lists.
Does not
function.
Selects the next upper
item in the same hierarchy.
When the setting value
is numeric, increases the
value. If you keep holding
down the key, the speed
of the value increasing is
increased depending on
the item.
[11]
(Settings)
Displays the [Setup] menu. Congure the
printing environment including the layout
adjustment and scaling print output.
Goes down the hierarchy.
[12]
(OK)
Does not function. Executes the selected item.
Otherwise, goes down the
hierarchy.
No. Name Function
[13]
(Reset)
Displays the [Reset] menu. Performs
the printer reset operation, the print data
output, and the shutdown operation.
Selects the next lower
item in the same hierarchy.
When the setting value
is numeric, reduces the
value. If you keep holding
down the key, the speed
of the value decreasing is
increased depending on
the item.
[14]
(Log In/Out)
The log in screen for using MEAP function
is displaed.
[15]
(Feeder Selection)
Displays the [Select Feeder] menu.
Specify which paper source is used to print
between the paper cassette and multi-
purpose tray and the paper size.
Does not function.
[17]
(Feeder Selection)
Displays the [Select Feeder] menu. Specify
which paper source is used to print bitween
the paper size.
purpose tray and the paper size.
T-1-14