Canon imageCLASS LBP6780dn - Displaying Logs

5
5
5-43
5-43
Troubleshooting > Updater > System Management Operations > Displaying Logs
Troubleshooting > Updater > System Management Operations > Displaying Logs
■
Displaying Logs
Update Logs
This section describes how to conrm System Option/MEAP Application Installation Logs and
Firmware Update Logs.
1. Select [Settings/Registration] > [License/Other] > [Register/Update Software] > [Display
Logs/Communication Test] from management mode of Remote UI.
Note:
You can also access from [Register/Updater Software (Management Settings)] > [Display
Logs/Communication Test]
2. Press [Update Logs] button.
F-5-59
3. Press [Switch] button.
4. System Option/MEAP Application Installation Logs and Firmware Update Logs are shown.
F-5-60