Canon imageCLASS LBP6780dn - Layout Menu; Quality Menu; Interface Menu; User Maintenance

1
1
1-14
1-14
Product Description > Using The Machine > Setup Menu (LBP3560/6750dn) > User Maintenance
Product Description > Using The Machine > Setup Menu (LBP3560/6750dn) > User Maintenance
■
Layout Menu
NOTE:
• Bold values in the table indicate the default settings.
Setting Item Setting Value
[Copies] 1 to 9999
[Offset Y] -50.0 to 0.0 to 50.0 (mm)
[Offset X] -50.0 to 0.0 to 50.0 (mm)
[Binding Location] [Long Edge], [Short Edge]
[Gutter] -50.0 to 0.0 to 50.0 (mm)
[Alternative Method] [Off], [On]
■
Quality Menu
NOTE:
• Bold values in the table indicate the default settings.
Setting Item Setting Value
[Image Renement] [Off], [On]
[Gradation Level] [Standard], [High]
[Toner Save] [Off], [On]
[Density] -4 to 0 to 11
[Halftones]
[Text] [Resolution], [Gradation], [Color Tone], [High Resolution]
[Graphics] [Resolution], [Gradation], [Color Tone], [High Resolution]
[Image] [Resolution], [Gradation], [Color Tone], [High Resolution]
[Quality Change] [Continue Printing], [Stop Printing]
T-1-18
T-1-19
■
Interface Menu
NOTE:
• Bold values in the table indicate the default settings.
• After changing the setting items with "*1", cycle the power of the printer or perform a hard
reset to make the settings effective.
• The setting items or setting values with "*2" may not be displayed depending on the
availability of the optional accessories and other settings.
Setting Item Setting Value
[Interface Connection]*1
[USB] [Off], [On]
[Network] [Off], [On]
[Mode Timeout]
[Mode Timeout] [Off], [On]
[Time] 5 to 15 to 300 seconds
[Connection Recog.]*1 [Off], [On]
[Extension Card]*2 -
[Extended RX Buffer]*1*2 [Off], [On]
■
User Maintenance
NOTE:
• Bold values in the table indicate the default settings.
• The setting items or setting values with "*" may not be displayed depending on the
availability of the optional accessories and other settings.
Setting Item Setting Value
[Adj. Start Position]
[Offset Y (MP Tray)] -5.0 to 0.0 to 5.0 (mm)
[Offset X (MP Tray)] -5.0 to 0.0 to 5.0 (mm)
[Offset Y (Cass. 1)] -5.0 to 0.0 to 5.0 (mm)
[Offset X (Cass. 1)] -5.0 to 0.0 to 5.0 (mm)
[Offset Y (Cass. 2)]* -5.0 to 0.0 to 5.0 (mm)
[Offset X (Cass. 2)]* -5.0 to 0.0 to 5.0 (mm)
[Offset Y (Cass. 3)]* -5.0 to 0.0 to 5.0 (mm)
[Offset X (Cass. 3)]* -5.0 to 0.0 to 5.0 (mm)
[Offset Y (Duplex)] -5.0 to 0.0 to 5.0 (mm)
[Offset X (Duplex)] -5.0 to 0.0 to 5.0 (mm)
[Recovery Printing] [Off], [On]
[Check Paper Size] [Off], [On]
[Substitute Size] [Off], [On]
T-1-20