Cisco ASR 1001 Hardware Installation Guide

CHAPTER 3
Cisco ASR 1000 Series Routers Embedded
Services Processors
The Cisco ASR 1000 Series embedded services processors are based on the Cisco QuantumFlow Processor
(QFP) for next-generation forwarding and queuing. The Cisco ASR1000-ESP5, Cisco ASR1000-ESP10,
Cisco ASR1000-ESP10-N, Cisco ASR1000-ESP20, Cisco ASR1000-ESP40, Cisco ASR1000-ESP100, and
Cisco ASR 1000-ESP200 provide centralized forwarding-engine options for the Cisco ASR 1000 Series
Aggregation Services Routers.
Additionally, the Cisco ASR 1002 Fixed Router includes a nonmodular, fixed embedded services processor
with a throughput of 2.5 Gbps and the Cisco ASR 1001 Router has a nonmodular, fixed embedded services
processor with a throughput of 2.5 Gbps, which is upgradable with a software activated performance upgrade
license to 5 Gbps.
The Cisco ASR 1000 Series embedded service processors:
•
Provide the centralized embedded forwarding services responsible for the bulk of the data plane
processing tasks. All network traffic through the Cisco ASR 1000 Series system flows through the
Cisco ASR 1000 Series Embedded Services Processors.
•
Are responsible for the data-plane processing tasks and all network traffic flows through them.
•
Support Forwarding Engine Control Processor which provide hardware abstraction layer between the
QFP-based forwarding engine and other system components, allowing datapath and management
functions to be independent.
•
Support Cisco QuantumFlow Processor (QFP) forwarding engines.
•
Support QFP provisioned with two TCAM4 devices for ACL lookup and other software features.
•
Perform all baseline packet routing operations, including MAC classification, Layer 2 and Layer 3
forwarding, quality-of-service (QoS) classification, policing and shaping, security access control lists
(ACLs), VPNs, load balancing, NetFlow.
•
Are responsible for features such as firewalls, intrusion prevention, Network Based Application
Recognition (NBAR), Network Address Translation (NAT), and flexible pattern matching.
•
Incorporates a security encryption coprocessor to assist encryption processing common to all embedded
services processors. The security processor operates in coprocessor mode and only processes packets
sent to it by the Cisco QFP.
Cisco ASR 1000 Series Router Hardware Installation Guide
87

Cisco ASR 1001 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB ports quantity	1
Ethernet LAN (RJ-45) ports	4
VPN tunnels quantity	8000
Product color	Gray
Rack capacity	1U
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	8192 MB
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	11350 g