Cisco ASR 1001 Hardware Installation Guide

Individual Cisco products in your networks
◦
◦
PIDs and SNs for service and replaceable products
◦
VIDs for product version visibility
•
Facilitates discovery of products subject to recall or upgrade
•
Enhances inventory automation of Cisco products
The Cisco product identification standard provides the following features:
• Version visibility—Cisco continuously improves products through feature additions. Product changes
are indicated by incrementing the version ID (VID), which provides version visibility to help you
understand and manage product changes. The VID management ensures consistency of changes from
product to product.
• Operating expense reduction— The Cisco UDI provides accurate and detailed network inventory
information; identifying each Cisco product in a network element through a standard interface. Cisco
operating systems can view and use this data, allowing you to automate your electronic inventory.
• Consistency across product layers—The UDI is designed into hardware products and cannot overwritten
in error. Operating and management systems discover the UDI through standard interfaces and display
the UDI in standard outputs. Standard interfaces include the IETF standard ENTITY-MIB.
Go to the following URL for complete information on the product identification standard: http://
www.cisco.com/go/udi/
Note
Serial Number Label Location
This section contains graphics of each chassis showing the location of the serial number label:
Cisco ASR 1000 Series Router Hardware Installation Guide
18
Cisco ASR 1000 Series Routers Hardware Overview
Serial Number Label Location

Cisco ASR 1001 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB ports quantity	1
Ethernet LAN (RJ-45) ports	4
VPN tunnels quantity	8000
Product color	Gray
Rack capacity	1U
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	8192 MB
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	11350 g